Sarkari Job Alert

Government jobs • Admit cards • Results

UPSSSC Junior Engineer Syllabus 2026 Out - Check Exam Pattern & Topic-Wise Marks

By Admin • October 13, 2026

SYLLABUS

UPSSSC Junior Engineer Syllabus 2026 Out - Check Exam Pattern & Topic-Wise Marks

Uttar Pradesh Subordinate Services Selection Commission (UPSSSC) — syllabus released 12 October 2026

In short: The Uttar Pradesh Subordinate Services Selection Commission (UPSSSC) has released the official syllabus for the Combined Junior Engineer (Mechanical) Mains Examination 2026 under Advt. No. 24-Pariksha/2026 on 12 October 2026. The Mains is a single objective paper of 100 MCQs for 100 marks in 120 minutes, with −0.25 negative marking. UP General Knowledge (20 marks) carries the highest weightage, followed by Theory of Machines & Machine Design and Computer & IT (15 marks each).

OrganizationUttar Pradesh Subordinate Services Selection Commission (UPSSSC)
ExamCombined Junior Engineer (Avar Abhiyanta / Yantranik) Mains Examination 2026 (Advt. No. 24-Pariksha/2026)
Posts1,156 across 8 departments
Syllabus released on12 October 2026
Exam pattern100 MCQs, 100 marks, 120 minutes, −0.25 negative marking
Applications3 November – 25 November 2026
Selection processPET-2025 + Written Mains + Document Verification (no interview)
Official websiteupsssc.gov.in

A big Sarkari Naukri 2026 update for engineering diploma and degree holders: the Uttar Pradesh Subordinate Services Selection Commission has notified the Combined Junior Engineer (Mechanical) Mains Examination 2026 with a total of 1,156 posts spread across eight departments of the Uttar Pradesh government, including the Irrigation Department (458 posts), PWD (264 posts) and UPSRTC (398 posts). The official notification No. 24-Pariksha/2026, dated 12 October 2026, also published the complete subject-wise syllabus and exam pattern for the Mains written examination. Applications open on 3 November 2026 and close on 25 November 2026. The Mains paper is a compact, speed-based test — 100 objective questions for 100 marks to be finished in 120 minutes, with a negative marking of 0.25 per wrong answer. With UP General Knowledge alone carrying 20 of the 100 marks, non-technical preparation is as decisive as the mechanical core. This article breaks down the complete exam pattern, the topic-wise syllabus with weightage-based priority guidance, a phased preparation strategy and recommended books, all based on the official notification.

Key Highlights

  • 1,156 posts across 8 UP departments — Irrigation (458), PWD (264), UPSRTC Mechanic (270) + Sahayak Bhandaarpal (128), Panchayati Raj (32), Groundwater (3), Prison Department (1).
  • Single Mains written paper: 100 MCQs, 100 marks, 120 minutes, −0.25 negative marking per wrong answer.
  • UP General Knowledge carries 20 marks — the single highest-weightage section; Theory of Machines & Machine Design and Computer & IT + Contemporary Technology carry 15 each.
  • Selection through PET-2025 (mandatory, already completed) + Written Mains + Document Verification — no interview.
  • Applications: 3 November to 25 November 2026 on upsssc.gov.in.

Quick Overview: UPSSSC Junior Engineer Syllabus 2026

OrganizationUttar Pradesh Subordinate Services Selection Commission (UPSSSC)
Exam NameCombined Junior Engineer (Avar Abhiyanta / Yantranik) Mains Examination 2026 (Advt. No. 24-Pariksha/2026)
Post NamesAvar Abhiyanta (Yantranik), Avar Abhiyanta, Mechanic, Sahayak Bhandaarpal, Sahayak Jila Panchayat Raj Adhikari, Technical Assistant (Yantranik), Anudeshak Machine — 1,156 posts
Selection ProcessPET-2025 (mandatory) → Written Mains Examination → Document Verification. No interview.
Official Websitehttps://upsssc.gov.in

What is the UPSSSC Junior Engineer Mains exam pattern 2026?

The UPSSSC Junior Engineer (Mechanical) Mains Examination 2026 is a single objective written paper. The verified exam pattern from notification No. 24-Pariksha/2026 is given below. Note the pace it demands: 100 questions in 120 minutes means just over a minute per question — this is a speed-and-accuracy test, and the −0.25 negative marking punishes blind guessing.

PaperSingle written paper (Mains), objective type (MCQ)
Total questions100 MCQs
Total marks100 (1 mark per question)
Duration120 minutes (2 hours)
Negative marking−0.25 (1/4 mark) for each wrong answer
Qualifying stagePET-2025 (mandatory; already completed)
Further stagesDocument verification after Mains merit; no interview

What is the subject-wise weightage in the UPSSSC JE Mechanical Mains 2026?

The notification prescribes a fixed mark distribution across ten sections totalling 100 marks. Understanding this weightage is the single most important input for planning your preparation, because not all sections repay the same study time. The verified distribution is:

Subject / SectionMarksPriority
UP General Knowledge20Highest — 1/5 of the paper
Theory of Machines & Machine Design15Very high — core technical
Computer & IT + Contemporary Technology15Very high — scoring, factual
Engineering Mechanics10High — foundation for SOM
Strength of Materials10High — formula-driven
Fluid Mechanics & Hydraulic Machines10High — concept + numerical
Thermodynamics5Medium — focused topics
I.C. Engine5Medium — cycles & performance
Steam & Power Plant Engineering5Medium — Rankine, boilers, turbines
Refrigeration & Air Compression5Medium — principles & cycles
Total100

The strategic reading of this table is clear: 50 of the 100 marks come from three sections — UP GK (20), Theory of Machines & Machine Design (15) and Computer & IT + Contemporary Technology (15). A mechanical engineer who ignores UP GK and the Computer & IT section surrenders half the paper. Conversely, the four 5-mark thermal sections (Thermodynamics, I.C. Engine, Steam & Power Plant, Refrigeration) are worth only 20 marks combined — cover them efficiently with notes and previous questions rather than deep textbook dives.

What is the detailed topic-wise syllabus for UPSSSC JE Mechanical 2026?

Below is the section-wise syllabus exactly as notified, with priority guidance based on the verified marks. All topics below are taken from the official notification — nothing has been added or invented.

1. Theory of Machines & Machine Design — 15 marks (highest-priority technical section)

Notified topicsFour-bar linkages, flywheels, belt drives (V-belt and flat belt), clutches, gears (types, tooth profiles, gear ratio), governors, cams, bearings
Preparation guidanceGears, belt drives and governors are the classic high-yield areas here. Practise gear-ratio and velocity-ratio numericals; learn cam and follower terminology precisely, since MCQs love definitions.

2. Engineering Mechanics — 10 marks

Notified topicsEquilibrium of forces, Newton's laws of motion, friction
Preparation guidanceA compact section — master free-body diagrams and friction-angle problems. This is also the foundation for Strength of Materials, so time spent here pays twice.

3. Strength of Materials — 10 marks

Notified topicsStress–strain, elastic constants, riveted joints, bending moment and shear force diagrams, torsion of circular shafts, thin-walled pressure vessels
Preparation guidanceHighly formula-driven — keep a one-page formula sheet for torsion, bending stress and pressure vessels. Bending-moment and shear-force diagram questions are quick scoring opportunities.

4. Thermodynamics — 5 marks

Notified topicsProperties of pure substances, steam tables, 1st and 2nd law of thermodynamics, steady flow energy equation (SFEE), heat engines, heat pumps, refrigerators
Preparation guidanceFocus on definitions and the two laws plus SFEE applications. Steam-table reading is a practical skill — know how to find properties quickly.

5. I.C. Engine — 5 marks

Notified topicsAir-standard cycle, Diesel cycle, performance parameters
Preparation guidanceEfficiency formulas for Otto/Diesel/Dual cycles and the standard performance parameters (indicated, brake and friction power, specific fuel consumption) cover nearly all questions here.

6. Steam & Power Plant Engineering — 5 marks

Notified topicsRankine cycle, boilers, steam turbines, nozzles, fittings
Preparation guidanceRankine cycle efficiency and its improvement methods (reheat, regeneration) plus boiler types and mountings/fittings are the recurring question zones.

7. Refrigeration & Air Compression — 5 marks

Notified topicsAir compressor cycles, refrigeration plant principles
Preparation guidanceVapour-compression cycle components and COP concepts, plus multistage compressor reasoning — keep this section short and sharp.

8. Fluid Mechanics & Hydraulic Machines — 10 marks

Notified topicsFluid statics, pressure measurement, hydraulic turbines, centrifugal pumps (classification, principles, performance)
Preparation guidanceTurbine types (Pelton, Francis, Kaplan) and pump classification questions are favourites. Manometers and pressure-measurement devices are quick marks.

9. Computer & IT + Contemporary Technology — 15 marks (scoring non-core section)

Notified topicsInternet, WWW, hardware and software, IP addresses, MS Word and Excel, operating systems, social networking, e-governance, Artificial Intelligence, Big Data, Machine Learning, Internet of Things (IoT), India's achievements in science and technology
Preparation guidanceThe most marks-per-hour section of the paper — factual, current-affairs-linked and familiar to most candidates. Do not neglect the contemporary-technology half (AI, Big Data, ML, IoT, e-governance, India's tech achievements), which is explicitly notified and very current-affairs-friendly.

10. UP General Knowledge — 20 marks (highest weightage)

Notified topicsHistory, culture, art, architecture, festivals, literature, geography, environment, economy, agriculture, industry, polity and administration of Uttar Pradesh, plus current events of the state
Preparation guidanceOne-fifth of the paper — this section alone can decide the merit list. Cover UP's districts, rivers and agriculture, major historical sites and architecture, festivals and folk culture, state polity and schemes, and the last 6–8 months of UP current affairs. A standard UP GK book plus a current-affairs compilation is sufficient.

How should I prepare for the UPSSSC JE Mechanical Mains in phases?

A phased plan keeps the 100-mark paper manageable. The suggestions below use only the verified weightage above — no invented cut-offs or study-hour claims:

  • Phase 1 — Foundation (first pass): Cover Theory of Machines & Machine Design (15), Engineering Mechanics (10) and Strength of Materials (10) together, since the mechanics foundation feeds all three. Parallel daily revision of UP GK facts — 20 marks demand continuous, not last-minute, exposure.
  • Phase 2 — Scoring sections: Finish Computer & IT + Contemporary Technology (15) quickly — high return per hour — along with Fluid Mechanics & Hydraulic Machines (10). Begin short-notes revision of Phase 1 formulas.
  • Phase 3 — Thermal block: Cover Thermodynamics, I.C. Engine, Steam & Power Plant and Refrigeration (20 marks combined) with focused notes and formula sheets rather than exhaustive reading.
  • Phase 4 — Test series mode: Take full-length 100-question, 120-minute mock tests to build the required pace (72 seconds per question). Practise the negative-marking discipline: attempt only when you can eliminate at least one option — with −0.25 per wrong answer, blind guesses on a 4-option MCQ lose marks on average.

Which books are recommended for UPSSSC JE Mechanical 2026?

Use standard, widely available references — no single book covers all ten sections, so combine the following generic resources (titles only; buy from any source of your choice):

  • Theory of Machines & Machine Design: a standard Theory of Machines textbook (e.g. R.S. Khurmi or S.S. Rattan) for mechanisms, gears, governors and cams; a Machine Design reference for bearings, clutches and belt drives.
  • Engineering Mechanics & Strength of Materials: R.S. Khurmi's Engineering Mechanics and Strength of Materials volumes — formula-rich and MCQ-friendly.
  • Thermodynamics, I.C. Engine, Steam & Power: a compact thermal-engineering reference covering cycles (Rankine, Otto, Diesel), boilers and turbines; steam-table practice from any standard data book.
  • Fluid Mechanics & Hydraulic Machines: a standard fluid mechanics text for statics and pressure measurement, plus a hydraulic-machines chapter for turbines and centrifugal pumps.
  • Refrigeration: the refrigeration chapter of any thermal-engineering or RAC textbook (vapour-compression cycle, COP, compressors).
  • Computer & IT: any standard computer-awareness book covering Internet, MS Office, operating systems and networking, supplemented with current-affairs notes on AI, Big Data, ML, IoT and e-governance.
  • UP General Knowledge: a dedicated Uttar Pradesh GK book (history, geography, polity, economy, culture) plus a monthly current-affairs compilation focused on UP for the last 6–8 months.
  • Practice: previous UPSSSC JE and other state JE mechanical question papers for pattern familiarity and speed.

What is the eligibility recap and post-wise vacancy break-up?

Verified facts from the notification: candidates must have qualified PET-2025 (already completed) — it is a mandatory screening stage for this recruitment. Selection proceeds through the Written Mains Examination followed by document verification, with no interview. Mechanical/technical posts dominate the advertisement (the exam itself is the Mechanical Mains paper). Detailed qualification, age-limit and relaxation figures are as per the official notification — candidates should verify their specific eligibility on upsssc.gov.in before applying. Salary figures are not verified for this article and are omitted; pay is as per Uttar Pradesh government norms.

PostDepartmentPosts
Avar Abhiyanta (Yantranik)Irrigation Department (general + special selection)458
Avar AbhiyantaPWD264
MechanicUPSRTC270
Sahayak BhandaarpalUPSRTC128
Sahayak Jila Panchayat Raj AdhikariPanchayati Raj32
Technical Assistant (Yantranik)Groundwater03
Anudeshak MachinePrison Department01
Total1,156

Important Links: UPSSSC Junior Engineer Syllabus 2026

Download Syllabus PDF (Advt. 24-Pariksha/2026)Link not available yet — check the official website
Official Notificationhttps://upsssc.gov.in (Live Advertisement section, Advt. No. 24-Pariksha/2026)
Official Websitehttps://upsssc.gov.in

Note: the direct notification/syllabus PDF link could not be verified at the time of writing. Candidates should download it from the Live Advertisement section of the official UPSSSC website (upsssc.gov.in) under Advt. No. 24-Pariksha/2026.

Key Takeaways

  • Single Mains paper: 100 MCQs / 100 marks / 120 minutes / −0.25 negative marking — practise at 72 seconds per question.
  • Half the paper (50 marks) sits in three sections: UP GK (20) + Theory of Machines & Machine Design (15) + Computer & IT (15) — prioritise these.
  • PET-2025 is mandatory; selection is Mains + document verification with no interview.
  • Applications run 3–25 November 2026 on upsssc.gov.in; verify eligibility and fee details in the official notification before applying.
  • Do not attempt blind guesses — with −0.25 per wrong answer, attempt only questions where you can eliminate at least one option.

FAQs: UPSSSC Junior Engineer Syllabus 2026

Q1. When was the UPSSSC Junior Engineer Syllabus 2026 released?
The UPSSSC Junior Engineer Syllabus 2026 was released on 12 October 2026 along with official notification No. 24-Pariksha/2026 on the UPSSSC website.

Q2. What is the exam pattern of the UPSSSC JE Mechanical Mains 2026?
The UPSSSC JE Mechanical Mains 2026 is a single objective paper with 100 MCQs for 100 marks (1 mark per question), a duration of 120 minutes, and negative marking of 0.25 marks for each wrong answer.

Q3. How many posts are advertised in UPSSSC Advt. No. 24-Pariksha/2026?
Advt. No. 24-Pariksha/2026 covers 1,156 posts across 8 departments, including 458 Avar Abhiyanta (Yantranik) in Irrigation, 264 Avar Abhiyanta in PWD, 270 Mechanic and 128 Sahayak Bhandaarpal in UPSRTC, 32 Sahayak Jila Panchayat Raj Adhikari in Panchayati Raj, 3 Technical Assistant (Yantranik) in Groundwater and 1 Anudeshak Machine in the Prison Department.

Q4. Which subject carries the highest marks in the UPSSSC JE Mechanical Mains?
UP General Knowledge carries the highest weightage at 20 marks out of 100, followed by Theory of Machines & Machine Design and Computer & IT + Contemporary Technology at 15 marks each.

Q5. Is there negative marking in the UPSSSC JE Mains 2026?
Yes. The UPSSSC JE Mechanical Mains 2026 has a negative marking of 0.25 (one-fourth) mark for every wrong answer, so candidates should avoid blind guessing.

Q6. Is PET mandatory for the UPSSSC Junior Engineer 2026 recruitment?
Yes. Qualifying PET-2025 (already completed) is a mandatory screening stage for the UPSSSC Junior Engineer 2026 recruitment under Advt. No. 24-Pariksha/2026.

Q7. Is there an interview in the UPSSSC JE 2026 selection process?
No. The UPSSSC JE 2026 selection process consists of PET-2025, the Written Mains Examination and document verification — there is no interview.

Q8. What are the application dates for UPSSSC Advt. 24-Pariksha/2026?
Applications for UPSSSC Advt. No. 24-Pariksha/2026 open on 3 November 2026 and close on 25 November 2026, to be submitted on the official website upsssc.gov.in.

Q9. What topics are covered in the Computer & IT section of the UPSSSC JE syllabus?
The Computer & IT + Contemporary Technology section (15 marks) covers the Internet, WWW, hardware and software, IP addresses, MS Word and Excel, operating systems, social networking, e-governance, Artificial Intelligence, Big Data, Machine Learning, IoT and India's achievements in science and technology.

Q10. How should I prioritise subjects for the UPSSSC JE Mechanical Mains?
Give first priority to UP GK (20 marks), Theory of Machines & Machine Design (15) and Computer & IT (15) — together 50 marks. Next, Engineering Mechanics, Strength of Materials and Fluid Mechanics (10 each). Cover the four 5-mark thermal sections (Thermodynamics, I.C. Engine, Steam & Power Plant, Refrigeration) efficiently with notes and previous questions.

Q11. Where can I download the official UPSSSC JE syllabus PDF?
The official syllabus is part of notification No. 24-Pariksha/2026 in the Live Advertisement section of https://upsssc.gov.in. The direct PDF link could not be verified at the time of writing — download it only from the official UPSSSC website.

Q12. What is the duration of the UPSSSC JE Mains paper?
The UPSSSC JE Mechanical Mains paper duration is 120 minutes (2 hours) for 100 questions, which means candidates get just over a minute per question and must practise speed with full-length mock tests.

Candidates are advised to read the official notification No. 24-Pariksha/2026 on upsssc.gov.in carefully before applying, and to follow Job Ready Portal for further updates on the UPSSSC Junior Engineer recruitment.

Last updated: 13 October 2026

Comments

Leave a comment →